서버관련정보라서 좀 어렵습니다^^

LAN over USB Windows Driver Installation


윈도우서버를 모두 설치하고 나면 간혹 설치가 안되어있는 디바이스가 있습니다
바로 RNDIS Device 입니다

설치 방법을 알려드립니다

1. 반드시 IMM , UEFI 를 업데이트 합니다.그러면 자동으로 설치가 됩니다

그래도 안된다고 하면 다음에 따라서
설치 하면 됩니다

Use this information to install the LAN over USB driver for Windows.

When you install Windows, there will be an unknown RNDIS device in the device manager. IBM provides a Windows INF file that identifies this device. The signed version of the INF is included in all of the Windows versions of the IMM, UEFI, and DSA update packages. Perform the following steps to install ibm_rndis_server_os.inf.
Note: These steps only need to be performed if the server is running a Windows operating system and the ibm_rndis_server_os.inf file has not been previously installed. The file needs to be installed only once. It is required by Windows operating systems to detect and use the LAN over USB functionality.
  1. Obtain a Windows version of the IMM, server firmware, and DSA update package (see Firmware updates for more information).
  2. Extract the ibm_rndis_server_os.inf and device.cat files from the firmware update package and copy them to the \WINDOWS\inf subdirectory.
  3. For Windows 2003: Install the ibm_rndis_server_os.inf file by right-clicking on the file and selecting Install. This generates a PNF file of the same name in \WINDOWS\inf.

    For Windows 2008: Go to Computer Management, then Device Manager and find the RNDIS Device. Select Properties > Driver > Reinstall driver. Point the server to the \Windows\inf directory where it can find the ibm_rndis_server_os.inf file and install the device.

  4. Go to Computer Management then Device Manager and right-click on Network adapters and select Scan for hardware changes. A small pop-up confirms that the Ethernet device is found and installed. The New Hardware Wizard starts automatically.
  5. When you are prompted with the question, “Can Windows connect to Windows Update to search for software?", select No, not this time. Click Next to continue.
  6. When you are prompted with the question, "What do you want the wizard to do?", select Install from a list or specific location (Advanced). Click Next to continue.
  7. When you are prompted with the statement, "Please choose your search and installation options", select Don't search. I will choose the driver to install. Click Next to continue.
  8. When you are prompted with the statement, "Select a hardware type, and then click Next", select Network adapters. Click Next to continue.
  9. You are prompted with the statement, "Completing the Found New Hardware Wizard". Click Finish.
    Note: A new local area connection appears and might state, "This connection has limited or no connectivity". Ignore this message.
  10. Go back to the Device Manager. IBM USB Remote NDIS Network Device appears under Network Adapters.
  11. Open a command prompt, type ipconfig, and press Enter. The local area connection for the IBM USB RNDIS appears with an IP address in the range of 169.254.xxx.xxx with a subnet mask set to 255.255.0.0.

링크 : http://publib.boulder.ibm.com/infocenter/bladectr/documentation/index.jsp?topic=/com.ibm.bladecenter.hs22v.doc/dw1iq_t_lan_over_usb_install_windows_driver_install.html

영문입니다^^
서버 엔지니어라면 당근 바로 할수 있겠죠.
파일이 안보이면 검색하면 나옵니다. 다른곳에 있을수도 있습니다.



 

저작자 표시 비영리 변경 금지
신고
멋진성이(http://comvcom.com)

About
IBM 어려서부터IT를 좋아하고 IT에 지속적인 관심을 가지고 있는 블로그운영자(멋진성이)입니다. 매번 변화하는 IT에 매력을 느끼며 IT업종에서 IBM서버 엔지니어를 담당하고 있습니다. 꼭 서버만이 아닌 컴퓨터/스마트폰/IPAD/PS3/XBOX 등등..많은 것에 관심이 있습니다. 더보기
TAG , , ,

댓글을 달아 주세요

홈으로

컴초모