본문 바로가기

멋진성이의 지식iN/IBM

IBM DS3400 1726-HC4 싱글->듀얼 컨트롤러 장착시 MES

반응형

먼저 확인사항


1. 듀얼을 지원하는 스토리지 인지 확인
2. 메모리 사이즈 , 컨트롤러 펌웨어 확인
3. 데이터 백업 필요


반드시 주의점
Make sure that the two controllers have the same cache memory capacity and options. An incompatible controller will be placed in a lockout state by the other controller in the DS3400.

1. 싱글 펌웨어를 듀얼 펌웨어로 적용 한다.
2. Start the command-line interface 를 이용해서 Smcli ctlr_A_IP_address -c "set storageSubsystem redundancyMode=duplex; 를 입력 한다.
3. 리부팅 한후 듀플렉스 모드로 변경이 되었는지 확인한다. (alternate controller missing error 라고 나온다) ,만약 안나오면 위 명령을 다시 입력후 리부팅
4. 컨트롤러 B 장착하고 5분정도 기다린후 인식 되면 SFP module 를 장착한다.


싱글 펌웨어가 적용이 되어있으면 스토리지메니져에서 컨트롤러 온라인 오프라인 메뉴가 보이지 않습니다.




반응형