반응형
블래이드 서버를 설치중이나 설치 후 미디어 트레이가 인식이 안되는 현상
시디롬 교체 , 미디어 트레이 교체 해도 안된다면 아마 미드플래인을 교체 하려고 할것이다.
이전에 반드시 확인 해야할 리테인 팁이 있습니다.
H163233
SYMPTOM:
A BladeCenter HS22 blade in a 8677 BladeCenter E chassis with
the media tray selected may lose connection to media tray
devices. The blade may hang during Operating System (OS)
install or when booting a live CD environment.
It may also lose access to the CD or DVD drive after the OS is
running.
뭐 일반 위 장비만된다고 되어있지만 H샤시에도 포함이 되는듯 합니다
이방법으로 해결가능합니다.
Change the Universal Serial Bus (USB) settings to 1.1 speed in
Unified Extensible Firmware Interface (UEFI):
1. Select F1 during system Power On Self Test (POST).
2. Select system settings.
3. Select Devices and I/O Ports.
4. Select USB Ports.
5. Modify USB controller 1 to USB 1.1.
6. Exit and save the settings.
If connectivity issues exist after taking those steps, contact
IBM support.
해결이라기 보다는 체크 해볼 부분입니다.
꼭 ~ 이거해도 안된다고 G랄 을 하는 분들이 있어서.. 안되면 어쩔껀데. 이러면 난감하단다.. 일단해보고 말하그라잉.
반응형
'멋진성이의 지식iN > IBM' 카테고리의 다른 글
IBM eX5 서버에 대하여 세미나 정리 (0) | 2010.03.19 |
---|---|
DS4000/DS3000 아이콘 상태 확인 (1) | 2010.03.19 |
1801 PCI resource error , 1801 PCI allocation errors (0) | 2010.03.15 |
블레이드 옵션 네트워크 카드에 관련된 Feature (1) | 2010.03.11 |
Onboard ethernet에서 2개의 MAC 주소가 감지됩니다 - Servers (3) | 2010.03.10 |